Description
Jazzy Elite ES Power Chair from Pride. An experience so superior, it can only be elite. The Jazzy Elite ES features large, front-drive wheels to absorb the bumps and uneven surfaces of everyday life. The comfortable, high-back seat gives you the support you need all day, every day.
Features
- In-line, front-wheel drive technology provides tight turns around corners
- Comfortable, depth-adjustable, limited recline high-back seat with headrest
- 40-apm, PG GC 3 controller
- Optimal indoor maneuverability in small spaces
- 300 lbs. weight capacity
- Up to 4 mph maximum speed
- 24.75" turning radius
- Up to 13.5 miles per charge
- Large front wheels for extra absorption over obstacles
- Available in Candy Apple Red
- Group 2: Standard (K0822/K0823)
Specifications
General
Weight Capacity300 lb
Speed34 mph
Operating Range3,6Up to 15 miles
Turning Radius124.75"
SuspensionLimited
Ground Clearance11.5"
DrivetrainTwo-motor, In-line
ColorsCandy Apple Red
ChargerOff Board
Controller40 amp, PG GC3
Battery12 volt, U-1 (2 required)
Braking SystemRegenerative and electro-mechanical
Dimensions
Width122.75"
Length1,234.75"
Height (ground to top of back of seat)21.5" - 23.5"
Weight
Assembled169.2 lbs.
Heaviest Piece469 lbs.
Without Batteries119.2 lbs.
Seat w/Arms50.2 lbs.
Battery525 lbs. each
Tires
Typesolid
Rear6" solid caster
Front9" solid
Drive WheelsFront
Anti-Tippers3" solid
Seat
StyleComfort, High-back
Width x Depth16" x 16"-18", 18" x 18" - 20", 20" x 18"-20"
Back Height - no headrest20"W - 20"W
Warranty
Frame5 Years Limited
Drive Train13 Months
Battery13 Months
Electronics13 Months
1. Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of + or - 3 %. Dimensions listed are for power base only. Overall measurements will vary based on seating and accessory selections.
2. Without front riggings.
3. Varies with user weight, terrain, battery type, battery condition and tire pressure.
4. Does not include seat or battery weights.
5. Battery weight may vary based on manufacturer.
6. Tested in accordance with ANSI/RESNA, WC Vol. 2, Section 4 and ISO 7176-4 standards. Results derived from theoretical calculations based on battery specifications and drive system performance. Testing conducted at maximum weight capacities. This specification can be subject to a variance of +10%, -5%.
