Home / Solutions / Victory LX Sport 4-Wheel
Pride

Victory LX Sport 4-Wheel

Model: S710LXW
Call for Our Best Price
Price Includes: Assembly and Delivery
To call find your location
Mobility Plus Victory LX Sport 4-Wheel
Mobility Plus Victory LX Sport 4-Wheel
Mobility Plus Victory LX Sport 4-Wheel

Features

  • CTS Suspension includes adjustable shocks for greater support
  • Charger port easily located on the tiller lets you conveniently charge your scooter
  • Delta tiller with ergonomic wraparound handles let you operate the scooter with one hand and rest your wrist
  • Easy-to- read voltmeter
  • Rearview mirror
  • Full light package with LED headlight, rear lights and directional signals plus a under-tiller courtesy light
  • Easy-to-use console features low and high-speed setting switch, speed dial, light switches, horn and directional signal buttons
  • High-back limited recline seat features sliders, height and width adjustable armrests, height adjustable headrest, and swivel

Specifications

General:
Medicare CodeK0899 - POWER MOBILITY DEVICE, NOT CODED BY DME PDAC OR DOES NOT MEET CRITERIA
Weight Capacity400 lbs.
Standard ColorsCandy Apple Red, Viper Blue
SuspensionFront and rear
Maximum Speed (1)Up to 8 mph
Operating Range (1,2) (Max.)Up to 19.7 miles at 200 lbs. / Up to 13 miles at 400 lbs.
Ground Clearance (3)2.2" at motor, 3.15" at mid-frame
Turning Radius (3)61.25"
Type Batteries (4,5)(2) 50 AH
Battery Charger5A
Dimensions:
Length (3)47"
Width (3)25.62"
Seat to Deck16.5"-18.5"
Seat-to-Ground23"-25"
Weight (w/o Batteries) (3,6): 160 lbs.
Weight of Heaviest Piece (2)77 lbs. (Front section)
Battery Weight 30.2 lbs. each
Tires:
Front3.5"x10" Solid
Rear3.5"x10" Solid
Seating (3)
Seat typeReclining high-back - Black Vinyl
Width x Depth18" x 18"
Warranty:
FrameLifetime
Drive Train2 Years Limited
Electronics2 Years Limited
Battery6-months
1. Varies with user weight, terrain type, battery amp-hour (AH), battery charge, battery condition and tire condition. These specifications can be subject to a variance of (+/- 10%).
2. Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of (+ or 3%).
3. AGM or gel cell type required.
4. Tested in accordance with ANSI/RESNA, WC Vol2, section 4 & ISO 7176-4 standards. Results derived from theoretical calculations based on battery specifications and drive system performance. Test conducted at maximum weight capacity.
5. Battery weight may vary based on battery manufacturer.

Request an in-home consultation with your local Mobility Plus expert.

❯FIND MY LOCATION